#******************************************************************************
# E.S.O. - VISTA project
#
# "@(#) $Id: dicVISTA_TCS_EXTRA.txt,v 0.6 2004/07/27 14:54:03 vltsccm Exp $"
#
# VISTA_TCS_EXTRA dictionary
#
# Note, the contents of this dictionary should end up in the VISTA TCS
# dictionary
#
# who       when      what
# --------  --------  ----------------------------------------------
# pbunclark 2004-07-27  Initial file
#
#******************************************************************************


DICTIONARY VISTA_EXTRA "VISTA" "Supplementary TEL headers for VISTA"
REVISION		"$Revision: 0.5 $"
CONTEXT			"FITS"

TEL.ENCL.MOONSCR.STEP	%d	Moonscreen positions step (h).
				The moonscreen can move in >= 5 steps
TEL.ENCL.WINDSCR1.STATE	%s	Louvre state (h).
				louvres open / shut
TEL.ENCL.WINDSCR2.STATE	%s	up/down slide state (h).
				The windscreen can go _both_ up & down
TEL.ENCL.VENT1.STATE	%s	Vent 1 door state (h).
				the 3 vent doors can be either shut, half
				open or full open
TEL.ENCL.VENT2.STATE	%s	Vent 2 door state (h).
				the 3 vent doors can be either shut, half
				open or full open
TEL.ENCL.VENT3.STATE	%s	Vent 3 door state (h).
				the 3 vent doors can be either shut, half
				open or full open
TEL.M2.LOOP1.STATE	%s	Focus-loop switch state (h).
				M2 close-loop focus state, CLOSED or OPEN
TEL.M2.LOOP2.STATE	%s	Centroiding-loop switch state (h).
				M2 close-loop centroiding state, CLOSED or OPEN
TEL.M2.LOOP3.STATE	%s	Tilt-loop switch state (h).
				M2 close-loop tilt state, CLOSED or OPEN
TEL.M2.LOOP4.STATE	%s	Astigmatic-loop switch state (h).
				M2 close-loop astigmatic state, CLOSED or OPEN
TEL.M2.LOOP5.STATE	%s	Trefoil-loop switch state (h).
				M2 close-loop trefoil state, CLOSED or OPEN
TEL.M2.CENX		%f	X-Centre reading 1 [metres] (h).
				M2 axis reading 1
TEL.M2.CENY		%f	Y-Centre reading 2 [metres] (h).
				M2 axis reading 2
TEL.M2.TILTX		%f	X-tilt reading 3 [metres] (h).
				M2 axis reading 3
TEL.M2.TILTY		%f	Y-tilt reading 4 [metres] (h).
				M2 axis reading 4
TEL.M1.ACTUATORFAILED	%d	Number of failed actuator (h).
				0 normally, else the number of a failed M1
				actuator.